Woods BACKHOE 1050 Operator's Manual download pdf (Page 46)

6.3. Transport Locking Pins

CAUTION: Always install transport locking pins into transport position when transporting or

storing unit. This will prevent accidental movement of unit.

CAUTION: Always remove transport locking pins from transport position before attempting to

operate the backhoe.

Transport Locking Pins in Transport Position

6.3.1. Position backhoe in transport position as follows:

i Raise boom assembly all the way up by retracting

boom cylinder.

i Curl bucket back into dipper assembly by extending

the bucket cylinder.

i Retract dipper assembly by extending the dipper

cylinder.

i Center backhoe by operating the swing cylinder.

i Remove the transport locking pins from the storage

position.

i Install the transport locking pins in the transport

position and secure with snap pins provided.

IMPORTANT: To prevent damage to backhoe boom

assembly, always curl bucket back into dipper

assembly by extending bucket cylinder with dipper

assembly extended slightly. Then retract dipper

assembly by extending dipper cylinder. Do this in

reverse when getting ready to operate backhoe.

This procedure is required to prevent bucket teeth

from contacting boom assembly when folding and

unfolding backhoe.

Swing Transport

Locking Pin

in Transport Position.

Boom Transport

Locking Pin

in Transport Position.

6.3.2. Place transport locking pins in storage position

during backhoe operation and secure using locking

pins provided.

Boom Transport Locking Pin

in Storage Position

Swing Transport Locking Pin

in Storage Position

Transport Locking Pins in Storage Position.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 105 106

No comments

Woods BACKHOE 1050 Operator's Manual Page 46