Woods BACKHOE 1050 Operator's Manual download pdf (Page 10)

0595-3067 CAUTION DECAL

To avoid serious injury or death:

15. Read operator's manual before using backhoe.

16. Operate backhoe controls only from normal backhoe operator's seat position.

17. Operate only with stabilizers down and on firm footing. Avoid digging in area of stabilizer pads. Stay clear

of steep areas or excavation banks that could give way.

18. Check the operating area to be dug for any possible overhead or underground lines such as electrical,

gas, oil, water, etc. Extreme caution must be exercised in areas where these are present. Consult local

utilities before digging.

19. Keep bystanders away from maximum swing reach area and stabilizers.

20. Keep all guards in place.

21. Inspect backhoe daily for loosened, bent, or broken parts.

22. Engage transport locking pins before transporting or servicing backhoe.

23. Be sure tractor is weighted to provide at least 20% of total weight on front wheels with backhoe in

transport position.

0595-3176 SERVICE DECAL

24. At every 50 hours of backhoe operation, replace hardware that secures the swing chains to the swing

cylinder. Use 3/8” 16NC x 1 ¾” Grd. 8 bolts, torque to max. of 54 ft. lbs.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 105 106

No comments

Woods BACKHOE 1050 Operator's Manual Page 10